Category Archives: All

iPad mini + Cellular + Wifi with Griffin Survivor Case

Posted on by

gb35918-3-survivorat-ipadmini-blk_1

Ipad Mini Information

To see how the mobilities lab has used this click here.

  • 7.9″ Retina Display: 2048 x 1536 screen resolution.
  • iPad mini is powered by the new 1.3Ghz A7 chip with 64-bit architecture. A7 delivers killer performance – up to four times faster CPU and up to eight times faster graphics performance than the previous generation – without sacrificing battery life.
  • Up to 10 hour battery life.
  • FaceTime HD and iSight Cameras: Built-In 5 MP webcamand a built-in 1.2 MP front facing camera.
  • iPad mini delivers twice the Wi‑Fi performance of its predecessor.

For more information click here.

Survivor Case Information

  • Independently tested and certified to meet conditions outlined in US Department of Defense MIL-STD-810
  • Integral Display shield deflects wind and rain (Test: up to 200 mm/hr for 1 hour)
  • Rigid internal frame protects against shocks and drops (Test: drop on flat concrete surface from 6’/1.8 m)
  • Sealed ports block blown sand and dust (Test: up to 18 m/sec for 1 hour)
  • Silicone cladding blocks vibration (Test: 18 hrs at 20 to 2000 Hz)
  • Includes multi-position workstand

Quantity : 11

LG Pocket Photo PD241T Printer Paper

Posted on by

Portable printer that allows you to print on the go using Bluetooth.

61dljof4PWL._SL1000_

New LG Pocket Photo PD241T Printer + Zink Photo Paper + Cover

Information

  • Contents: LG PD241T Printer White + Zink Photo Paper 30 Sheets + Atout Brown Case
  • Synchronization support for Windows Phone 8.0 or higher, iOS v5.1 or higher, Android v2.2 or higher.
  • No Ink required. Bluetooth wireless connectivity. Micro USB port for charging battery. Not NFC-enabled // Zink Inkless Printing Embeds Color Into The Paper: 2 x 3″ (7.6x5cm)
  •  Enable to print film when printer with case on. The case features LED indicator hole, power connect hole and power button hold.

Quantity : 1

61WYl1+7ZML._SL1000_

Zink Media 2×3″ Zero ink Photo Paper for LG Pocket Photo

Information

  • ZINK Ink Cartridges for LG Pocket Photo PD221,PD233, PD239 Printer
  • Zink Inkless Printing Embeds Color Into The Paper
  • Smudge-proof, water resistant, tear-resistant photos
  • Photo Size : 2″ x 3″

Quantity : 5

51YC0S62aFL

Information

  • Peel-off, sticky back photo paper
  • ZINK Ink Cartridges for LG Pocket Photo PD221,PD233, PD239 Printer (Sicker type)
  • Zink Inkless Printing Embeds Color Into The Paper
  • Smudge-proof, water resistant, tear-resistant photos
  • Photo Size : 2″ x 3″

Quantity : 1

GoPro Hero 4 Silver

Posted on by

CHDHY-401_main1

Information

To see the mobilities lab use it in action click here.

  • Features a built in touch display to control the camera just view, tap and swipe the screen.
  • Captures 4K (15fps), 2.7K (30fps), 1440p (48fps) 1080p (60fps) and 720p (120fps) video with life-like clarity plus 12MP photos at a staggering 30fps.
  • HiLight Tag which lets you tag video highlights for easy playback, editing and sharing.
  • The Hero4 shoots beautifully detailed 12 megapixel images at up to 30 frames per second too.
  • Connect to the GoPro app on your phone to have even more control.
  • With Protune, you can tweak your settings until their just right. Adjust colour levels, ISO, exposure and more for your own personal take on the action.
  • Customise exposure settings up to 30 seconds for single and time lapse photos.

For more information click here.

Kit Includes

  • HERO4 Silver Camera with Built-In Touch Display
  • Standard Housing 131¹(40m)
  • Skeleton + Touch Backdoors
  • Rechargeable Battery
  • Curved Adhesive Mount
  • Flat Adhesive Mount
  • Quick Release Buckles
  • 3-Way Pivot Arm (Mounting Hardware)
  • USB Cable

Quantity : 1

Canon EOS 6D with EF 24-105mm Lens kit

Posted on by

Canon EOS 6D with 24-105mm Lens Kit

Special features included within this camera include Wifi and GPS along with the ability to edit and process RAW images. Camera comes with 2 x 32GB SD cards.

Canon 6D :

  • 20Megapixel Full-Frame Sensor
  • 11-point AF
  • 4.5 frames per second of continuous shooting
  • ISO 100–25,600 Sensitivity, expandable to ISO 102,400
  • Full HD (1080, 30fps) movie recording
  • Shutter Speeds of 30-1/4000 sec (1/2 or 1/3 stop increments),
  • Weather Sealing
  • Dimensions (W x H x D): 144.5 x 110.5 x 71.2cm

24-105mm Lens :

  • EF Mount L-Series Lens
  • Aperture Range: f/4-22
  • One Super-UD & Three Aspherical Elements
  • Optical Image Stabilization
  • Ultrasonic Focus Motor
  • Manual Focus Override
  • Dustproof and Waterproof Sealing
  • Minimum Focus Distance: 1.5′

Quantity : 1 (Including the Body, Lens and 2 x 32GB memory cards)

Advanced Active Backpack

Posted on by

t380x390_b404adfc3899a041016b3b721d797810

The Active Backpack I is a high-capacity yet compact rucksack that can also be used as a standard daypack. It has the capacity to hold a DSLR system with 2 standard lenses, 15” laptop as well as other personal items and accessories.
The bag has four zippered compartments with the top part designed for personal items and the bottom for photo gear. Plenty of accessories will fit inside including items such as flash, laptop, documents or even an iPad. A removable bottom insert allows you to transform the rucksack into a handy daypack.

For more information click here.

Information

  • Weight – 1.2kg
  • Dimensions (L x H x W) – 31 x 46 x 23 cm

Quantity ; 1

GoPro Hero 4

Posted on by

CHDHX-401_main1

The GoPro Hero 4 is a HD-quality, waterproof and shockproof video recording device, ideal or sport and mobility purposes. GoPro cameras are renowned for being portable and lightweight, whilst still delivering amazingly crystal-clear video.

To see the mobilities lab use it in action click here.

Information

  • Delivers slow motion footage at 240 frames per second.
  • Waterproof up to 40 metres underwater.
  • Control of ISO Limit and exposure.
  • Time Lapse settings.
  • Audio captures clean sound 2x the dynamic range.
  • Settings for Ultra Wide field of view to change perspective.
  • Compatible with all GoPro Mounts.
  • GoPro App available to control camera remotely.
  • Resolution Options – 4K30, 2.7K60,1 1080p120, 720p2401

For more information click here.

Box Contents

  • HERO4 Black Camera
  • Standard Housing 131’(40m)
  • Skeleton Backdoor
  • Rechargeable Battery
  • Curved Adhesive Mount
  • Flat Adhesive Mount
  • Quick Release Buckles
  • 3-Way Pivot Arm (Mounting Hardware)
  • USB Cable

Quantity : 1

LilyPad Technology

Posted on by

LilyPad is a wearable e-textile technology developed by Leah Buechley and cooperatively designed by Leah and SparkFun. Each LilyPad was creatively designed to have large connecting pads to allow them to be sewn into clothing. Various input, output, power, and sensor boards are available. They’re even washable, but remove batteries.

For more information about the LilyPad technology click here.

db877d5ffa9027dd7d4e7fe5a31d870e.image.538x354

Lilypad LED White (5pcs)

Information

  • Simple very bright
  • 250mcd
  • White LED LilyPad.

Quantity : 5

08464-06-L__95513__57421.1368471061.1280.1280

Lilypad light sensor

With exposure to daylight, this sensor will output 5V. Covering the sensor with your hand, the sensor will output 0V. In a normal indoor lighting situation, the sensor will output from 1 to 2V.

Information:

  • 20mm outer diameter
  • Thin 0.8mm PCB
  • Light sensor that outputs an analog value from 0 to 5V.

Quantity: 1

08466-01__48820__87221.1368471060.1280.1280

Lilypad power supply

This board was designed to be as small and inconspicuous as possible. Pop in a AAA battery, flip the power switch, and you will have a 5V supply to power your LilyPad circuit.

Information

  • 56x26mm
  • Thin 0.8mm PCB
  • Good up to 200mA. Short circuit protected.
  • This board has AAA battery clips but can use an input from 1.2V to 5V.
  • Our lithium polymer batteries are a good, rechargeable alternative.

Quantity : 1

temp1__86472__46962.1368471065.1280.1280

LilyPad Temperature Sensor

The MCP9700 is a small thermistor type temperature sensor. Doing an analog to digital conversion on the signal line will allow you to establish the local ambient temperature. Detect physical touch based on body heat and ambient conditions with this small sensor.

Information

  • 20mm outer diameter
  • Thin 0.8mm PCB
  • This sensor will output 0.5V at 0 degrees C, 0.75V at 25 C, and 10mV per degree C.

Quantity : 1

09267-1__73142__15320.1368471016.1280.1280

LilyPad Accelerometer ADXL335

This is a three axis accelerometer for the LilyPad system. Based on the ADXL335 MEMS accelerometer from Analog Devices, the LilyPad Accelerometer can detect joint movement as well as inclination and vibration.

The ADXL335 outputs a 0V to 3V analog signal on each of the X, Y, and Z axis. You will need to convert this analog voltage to a gravity amount and use trigonometry to calculate a true ‘angle’. If you are not looking for tilt, it is very easy to use this sensor for basic motion sensing.

Information

  • 20mm outer diameter
  • Thin 0.8mm PCB

Quantity : 1

11008_01__05031__72080.1368472156.1280.1280

LilyPad Vibe Board

Apply 5V and be shaken by this small, but powerful vibration motor. Works great as an physical indicator without notifying anyone but the wearer. This version uses a surface mount motor which is less likely to be damaged during use.

Information

  • 20mm outer diameter
  • Thin 0.8mm PCB

Quantity : 1

12049-01

Arduino LilyPad USB – ATmega32U4

An updated version the Simple board to create the LilyPad USB by replacing the classic ATMega328 with the new ATMega32U4. Not only does that mean that it’s running a variation of the latest and greatest bootloader, but it also means no more FTDI Basic. The only extra piece of hardware you need to program the LilyPad USB is a micro-USB cable, since the new IC has built-in USB support. The LilyPad USB is also officially supported in the Arduino IDE as of version 1.0.2.

Just like the LilyPad Simple, this board features a JST socket so you can directly connect a Li-Po battery for power and an on-board power switch so you can turn it off when you’re not feeling particularly blinky. These boards were designed to streamline your next sewable project by keeping things simple and giving you more room to work while eliminating the need to sew a power supply. The LiPo battery is even rechargeable through the board, no more special external LiPo chargers are required.

Information

  • 50mm outer diameter
  • Thin 0.8mm PCB

Quantity : 1

Arduino Headers

Posted on by
8_pin_breakaway__58439__96210.1368472735.1280.1280

Break Away Header 8 Pin

Information

  • A row of headers – break to fit.
  • 8 pins that can be cut to any size eg. 2/3 pin headers .
  • Used with custom PCBs or general custom headers.

Quantity : 60

00115-03-L__96647__87240.1368471553.1280.1280

Break Away Female Headers

Information

  • Receptacle Style: Square
  • Pin Spacing: 0.1″ (2.54 mm)
  • Receptacle Depth: 6 mm
  • Single row of 40-holes, female header.
  • Can be cut to size with a pair of wire-cutters.
  • Please note: You will probably lose one pin with each cut.

Quantity : 10

00553-03-L__32789__24106.1368471034.1280.1280

Break Away Headers – Right Angle

Features: 

  • Pin Style: Square Pins
  • Number of Pins: 40
  • Pin Spacing: 0.1″ (2.54 mm)
  • Pin Length: 10.25 x 4.5 mm
  • Can be cut to size with a pair of wire-cutters.
  • They mate very well with break away male headers.
  • Please note: You will probably lose one pin with each cut.

Quantity : 2

XBee Pro 50mW Wire Antenna – Series 2 (ZB)

Posted on by

10421-04__58265__35995.1368471810.1280.1280

This is the XBee XBP24-BZ7WIT-004 module from Digi. The new Series 2B improves upon the power output and data protocol of the Pro Series2. Series 2B modules allow you to create complex mesh networks based on the XBee ZB ZigBee mesh firmware. These modules allow a very reliable and simple communication between microcontrollers, computers, systems, really anything with a serial port! Point to point and multi-point networks are supported.

Series 2B modules use a different hardware configuration from the earlier models and while they will communicate with Series 2 XBee modules, they are not compatible with the outdated Series 2.5 Modules.

Information

  • 3.3V @ 295mA
  • 250kbps Max data rate
  • 63mW output (+17dBm)
  • 1 mile (1600m) range
  • Wire Antenna
  • Fully FCC certified
  • 6 10-bit ADC input pins
  • 8 digital IO pins
  • 128-bit encryption
  • Local or over-air configuration
  • AT or API command set

Quantity : 2