Tag Archives: wearables

HQR Bullet Camera

Posted on by

hqr-c2

The HQR-C2 is a small DVD-quality digital video recorder that can be headmounted. It is a Picture in Picture (PiP) high-quality bullet camera (or ’sports’ camera) system for both in-car or on-bike setup.

Information

  • MPEG 2 and 4 video recording.
  • 32GB CF card support.
  • 8hrs recording on one card at full quality.
  • Battery back-up system.
  • 720 x 576 resolution.
  • 8000kb/s bit rate.
  • Supplied with suction mount.
  • Internal mic with external inputs for additonal mic or Intercom connection.

Kit Inventory

The following items come with the kit. Please contact FASS IT Workshop if any items are missing as soon as possible.

  1. DCS HQR-C2 PiP Digital Video Recorder
  2. material bag
  3. UK Mains Charger
  4. IR Remote Control
  5. Camera dual split cable
  6. 16GB Dogcam high Speed CF
  7. Card reader
  8. USB cable A to mini
  9. UTP Ethernet cable
  10. 2 x 2m camera lead extension
  11. LANC camera remote
  12. CD manual
  13. HQ2 Headset mount
  14. 2 x Camera mount
  15. 2 x HQ Bullet DSP Colour CCD Camera
  16. 2 x lens covers
  17. Hard Carry case
  18. Belt Clip
  19. Lemo twin input video cable

Kits Available

There is 1 kit available, identified by the university asset code FS01484 / Serial Number ?

Arduino Breakout Boards

Posted on by
09269-01

Triple Axis Accelerometer Breakout – ADXL335

Breakout board for the 3 axis ADXL335 from Analog Devices. This is the latest in a long, proven line of analog sensors – the holy grail of accelerometers.

Information

  • The ADXL335 is a triple axis MEMS accelerometer with extremely low noise and power consumption – only 320uA!
  • The sensor has a full sensing range of +/-3g.
  • There is no on-board regulation, provided power should be between 1.8 and 3.6VDC.
  • Board comes fully assembled and tested with external components installed.
  • The included 0.1uF capacitors set the bandwidth of each axis to 50Hz.

Quantity : 2

10496-01__67483__33463.1368472070.1280.1280

GS407 Breakout Board

This is a breakout board to allow simple access to the tightly pitched pins on the GS406 and GS407 GPS units.

Information

  • This board breaks out all of the necessary pins to a row of standard 0.1″ spaced header to allow for easy bread boarding and simple connection.
  • Note: TXO and RXI are labeled according to the GS407 datasheet, which is from the point of view of the MCU. Therefore, TXO should connect to TX on your microcontroller, and RXI should connect to RX.
  • Note: This is not compatible with the newer GS407 module, as it uses a different connector completely. Please check to make sure this board will work with your module. ktxbai!

Quantity : 2

XBEE_BRAKOUT_001__33349__62354.1368470919.1280.1280

Breakout Board for Xbee Module

This is a simple breakout board for the popular XBee product from Digi.

Information

  • This board breaks out all 20 pins of the XBee to a 0.1″ standard spacing dual row header.
  • The spacing between 0.1″ headers is 0.5″ making it breadboard DIP friendly.
  • We highly recommend using the female sockets to avoid having to solder the XBee permanently to the breakout board.
  • This is the PCB only.

Quantity : 2

Kenable USB 2.0 High Speed Cable Printer Lead A to B 1m

Posted on by

61RRuTnJzyL._SL1000_

Information

  • Length : 1m
  • Connections : A plug (flat) to B plug (Square)
  • USB v2.0 is a high speed connection method which is 40 times faster than USB v1.1 (480Mbps as opposed to 12Mbps).
  • It is plug & play and hot swappable (no need to turn off your PC to plug a device in or out).
  • USB v2.0 peripherals will not work at High Speed (480Mbps) unless they are connected with a USB v2.0 cable and connected to a computer equiped with USB v2.0 ports.

Quantity : 6

Arduino Starter Kit

Posted on by

cbabfd3196ac2a679c9c189fb441b6a1.image.447x354

This kit walks you through the basics of Arduino and electronics in a hands-on way. You will be able to build 15 projects using components that let you control the physical world through different kinds of sensors and actuators.

Click here to find out what projects you can make.

Kit Includes

  • 1 Arduino Projects Book (170 pages);
  • 1 Arduino UNO rev.3;
  • 1 USB cable;
  • 1 Breadboard;
  • 1 Wood base;
  • 1 9V Battery snap;
  • 70 Hard cables;
  • 2 flexible cables;
  • 6 Photoresistors;
  • 3 Trimmer d10 kOhm;
  • 10 Pushbutton;
  • 1 Temperature sensors;
  • 1 Tilt sensor;
  • 1 LCD (16x2i);
  • 1 LED (white);
  • 1 LED (RGB);
  • 8 LED (red);
  • 8 LED (green);
  • 8 LED (yellow);
  • 3 LED (blue);
  • 1 CC motor 6/9V;
  • 1 Servomotor;
  • 1 Piezo;
  • 1 H bridge;
  • 2 photocoupler;
  • 5 BC547;
  • 2 IRF520;
  • 5 100nF capacitor;
  • 3 100uF capacitor;
  • 5 100pF capacitor;
  • 5 1N4007 diode;
  • 3 Transparent jelly (rosso, verde, blu);
  • 1 Male strip connector (40×1);
  • 20 220 Ohm resistor;
  • 5 560 Ohm resistor;
  • 5 1 kOhm resistor;
  • 5 4.7 kOhm resistor;
  • 10 10 kOhm resistor;
  • 5 1 MOhm resistor;
  • 5 10 MOhm resistor.

Quantity : 2

Soldering Tools for Mobile Physical Computing

Posted on by
weller-whs40-temperature-controlled-solder-iron

Weller WHS40 Temperature Controlled Solder Iron

Quantity : 1

phpThumb_generated_thumbnailjpgCAWDJPMY__54733__94654.1368472894.1280.1280

Solder Station 40W – UK Plug

Quantity : 2

08965-03-L__72439__16141.1368471856.1280.1280

Brass Soldering Sponge with Base

Quantity : 3

10423_01a__64977__13030.1368472133.1280.1280

Solder – 1/4lb Spool (0.032″) Special Blend

Quantity : 2

31324_HH__52368_zoom__90166__41229.1368472384.1280.1280

Helping hands magnifier

Quantity : 2

633932__16932__30593.1368472897.1280.1280

Soldering Sponges

Quantity : 1

09327-2__81295__38416.1368470968.1280.1280

Solder Wick #2 5ft – Generic

Quantity : 1

23553_SCS__83269__83385.1368472383.1280.1280

Desoldering pump

Quantity : 2

Gopro Fetch dog harness

Posted on by

ADOGM-001_main1

Capture the world from your dog’s point of view.

To see the mobilities lab use it in action click here.

Information

  • Two mounting locations (back and chest) enable a variety of perspectives
  • Fully adjustable to fit dogs from 15 to 120 lbs (7 to 54 kg)
  • Chest mount is removable to accommodate smaller dogs
  • Padded at all adjustment points to ensure your pet’s comfort
  • Washable, water-friendly material holds up to swimming, splashing, mud and more
  • Quick release bases make attaching and removing the camera easy
  • Includes a camera tether to further secure your GoPro

For more information click here.

Quantity : 1

8GB Hidden Camera Glasses

Posted on by

41gWmYfyU4L._SX385_

Information

  • Size: 150*140*40mm (folded)
  • Weight: 35g.
  • Read/write speed: 1.5MBps-60MBps.
  • Power supply: Embedded battery 280mAh Li-polymer.
  • Battery life for a single charge: 1-2 hours.
  • Memory Support: Up to 32GB.
  • Resolution: 1280*720p. Video format: AVI.
  • Audio Recording: Stereo.
  • Lens specs: 5 mega pixels CMOS camera.
  • Recording Speed: Max 30FPS.
  • Operating System: Windows and Mac OS.

Quantity : 1

UYIKOO ® 720P Fashion Spy Sunglasses DV DVR

Posted on by

4176QPsKeUL

Sunglasses with built in invisible camera that can capture video, audio and images.

Information

  • Video resolution – 1280 x 720P (HD)
  • Video format – M-JPEG
  • Charging time – 1.5 hours
  • Battery enables up to 60 Mins continuous recording with power duration being 2-3 hours. Can take micro SD cards from 2GB to 32GB

Kit Includes

  • 720P Sunglasses DVR
  • USB Cable
  • Adapter
  • Case
  • English User Manual

Quantity : 1