XBee Explorer Dongle v2

11697_00__65586.1410944998.1280.1280

This is the XBee Explorer Dongle unit for the Digi XBee module line. With the XBee Explorer Dongle you can plug the unit directly into your USB port and have it act as a gateway between your computer and the XBee. No cables needed. This unit works with all XBee modules including the Series 1 and Series 2.5, standard and Pro version.

Information

  • The on-board voltage regulator is good up to 500mA.
  • The highlight of this board is an FT231X USB-to-Serial converter. That’s what translates data between your computer and the XBee.
  • Reset button
  • Voltage regulator to supply the XBee with plenty of power.
  • Four LEDs that’ll help if you ever need to debug your XBee: RX, TX, RSSI (signal-strength indicator)
  • Power indicator.

This board also breaks out each of the XBee’s I/O pins to a pair of breadboard-compatible headers. So if you want to make use of the XBee’s extended functionality, you can solder some header pins into those, or even just solder some wire.

Quantity : 2

LG Pocket Photo PD241T Printer Paper

Portable printer that allows you to print on the go using Bluetooth.

61dljof4PWL._SL1000_

New LG Pocket Photo PD241T Printer + Zink Photo Paper + Cover

Information

  • Contents: LG PD241T Printer White + Zink Photo Paper 30 Sheets + Atout Brown Case
  • Synchronization support for Windows Phone 8.0 or higher, iOS v5.1 or higher, Android v2.2 or higher.
  • No Ink required. Bluetooth wireless connectivity. Micro USB port for charging battery. Not NFC-enabled // Zink Inkless Printing Embeds Color Into The Paper: 2 x 3″ (7.6x5cm)
  •  Enable to print film when printer with case on. The case features LED indicator hole, power connect hole and power button hold.

Quantity : 1

61WYl1+7ZML._SL1000_

Zink Media 2×3″ Zero ink Photo Paper for LG Pocket Photo

Information

  • ZINK Ink Cartridges for LG Pocket Photo PD221,PD233, PD239 Printer
  • Zink Inkless Printing Embeds Color Into The Paper
  • Smudge-proof, water resistant, tear-resistant photos
  • Photo Size : 2″ x 3″

Quantity : 5

51YC0S62aFL

Information

  • Peel-off, sticky back photo paper
  • ZINK Ink Cartridges for LG Pocket Photo PD221,PD233, PD239 Printer (Sicker type)
  • Zink Inkless Printing Embeds Color Into The Paper
  • Smudge-proof, water resistant, tear-resistant photos
  • Photo Size : 2″ x 3″

Quantity : 1

XBee Pro 50mW Wire Antenna – Series 2 (ZB)

10421-04__58265__35995.1368471810.1280.1280

This is the XBee XBP24-BZ7WIT-004 module from Digi. The new Series 2B improves upon the power output and data protocol of the Pro Series2. Series 2B modules allow you to create complex mesh networks based on the XBee ZB ZigBee mesh firmware. These modules allow a very reliable and simple communication between microcontrollers, computers, systems, really anything with a serial port! Point to point and multi-point networks are supported.

Series 2B modules use a different hardware configuration from the earlier models and while they will communicate with Series 2 XBee modules, they are not compatible with the outdated Series 2.5 Modules.

Information

  • 3.3V @ 295mA
  • 250kbps Max data rate
  • 63mW output (+17dBm)
  • 1 mile (1600m) range
  • Wire Antenna
  • Fully FCC certified
  • 6 10-bit ADC input pins
  • 8 digital IO pins
  • 128-bit encryption
  • Local or over-air configuration
  • AT or API command set

Quantity : 2

Arduino Boards

ArduinoUno_R3_Front_450px__56471__20476.1368472596.1280.1280

Arduino Uno – R3

The Arduino Uno is a microcontroller board based on the ATmega328. It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started.

Information

  • Microcontroller – ATmega328
  • Operating Voltage – 5V
  • Input Voltage (recommended) – 7-12V
  • Input Voltage (limits) – 6-20V
  • Digital I/O Pins – 14 (of which 6 provide PWM output)
  • Analog Input Pins – 6
  • DC Current per I/O Pin – 40mA
  • DC Current for 3.3V Pin – 50mA
  • Flash Memory – 32 KB (ATmega328) of which 0.5KB used by bootloader
  • SRAM – 2KB (ATmega328)
  • EEPROM – 1KB (ATmega328)
  • Clock Speed – 16MHz

Quantity : 4

halfboard_LRG__38170__71109.1368472541.1280.1280

Half Size Breadboard

This half sized breadboard (2.2″ x 3.4″) is perfect for small projects and can be “snapped” together for larger ones. If a smaller board is required you can easily pull off the power rails or cut it in half using a saw to create 2 tiny breadboards.

Quantity : 10

12045-04__75102.1413881075.1280.1280

Bread board mini modulare blue

This blue Mini Breadboard is a great way to prototype your small projects.

Information

  • With 170 tie points there’s just enough room to build and test simple circuits.
  • Great for breaking out DIP package ICs to jumper wires!
  • If you run out of room, no worries, these mini breadboards can be snapped together to form larger stretches of board.
  • It has a peel and stick adhesive backing as well as two mounting holes for M2 screws so you can anchor it down.

Quantity : 10

bw6_01__68572__52198.1368472820.1280.1280

Breadboard jumper wire pack

Information

  • Basic breadboard jumper wire pack.
  • Including 4 different lengths: 200mm,165mm,125mm and 80mm.
  • Perfect design for a breadboard.
  • Contains approx 65 pieces

Quantity : 5

Arduino Starter Kit

cbabfd3196ac2a679c9c189fb441b6a1.image.447x354

This kit walks you through the basics of Arduino and electronics in a hands-on way. You will be able to build 15 projects using components that let you control the physical world through different kinds of sensors and actuators.

Click here to find out what projects you can make.

Kit Includes

  • 1 Arduino Projects Book (170 pages);
  • 1 Arduino UNO rev.3;
  • 1 USB cable;
  • 1 Breadboard;
  • 1 Wood base;
  • 1 9V Battery snap;
  • 70 Hard cables;
  • 2 flexible cables;
  • 6 Photoresistors;
  • 3 Trimmer d10 kOhm;
  • 10 Pushbutton;
  • 1 Temperature sensors;
  • 1 Tilt sensor;
  • 1 LCD (16x2i);
  • 1 LED (white);
  • 1 LED (RGB);
  • 8 LED (red);
  • 8 LED (green);
  • 8 LED (yellow);
  • 3 LED (blue);
  • 1 CC motor 6/9V;
  • 1 Servomotor;
  • 1 Piezo;
  • 1 H bridge;
  • 2 photocoupler;
  • 5 BC547;
  • 2 IRF520;
  • 5 100nF capacitor;
  • 3 100uF capacitor;
  • 5 100pF capacitor;
  • 5 1N4007 diode;
  • 3 Transparent jelly (rosso, verde, blu);
  • 1 Male strip connector (40×1);
  • 20 220 Ohm resistor;
  • 5 560 Ohm resistor;
  • 5 1 kOhm resistor;
  • 5 4.7 kOhm resistor;
  • 10 10 kOhm resistor;
  • 5 1 MOhm resistor;
  • 5 10 MOhm resistor.

Quantity : 2

WD TV Media Player Smart TV Box

9JYG_1A56A994-40FB-44DB-991A-9352E1AF0088_large

WD TV Media Player Smart TV Box – to play video file for projection

 

Information

  • Can play media file formats such as MKV, MP4, XVID, AVI, WMV, MOV and more
  • Can play media stored on USB and network storage devices, such as My Passport Ultra, My Cloud and any computer on your network
  • Can stream hit movies, trending videos, TV shows, and popular online entertainment such as YouTube™, Pandora®, Vudu™ and more
  • Turn your smartphone into a remote – Use your smartphone or tablet to easily control your WD TV with the tap of a finger.
  • Connecting a Slingbox® to stream live TV to any room in your house
  • Standard or high-definition television with HDMI or composite video connection. Wireless network needed to enable wireless compatibility.

Kit Contains

  • Media player
  • Remote control with batteries
  • Composite AV cable
  • AC adapter
  • Quick Install Guide

Quantity : 4

 

Zoom H1 Handy Recorder

61ApXU+vN0L._SL1000_

Like all Zoom recorders, the H1’s onboard microphones are configured in an X/Y pattern, for imaging. As both mics are arranged on the same axis, they are equidistant from the sound source for perfect localization and no phase shifting resulting great stereo recordings with natural depth and accurate imaging.

Information

  • Recording format flexibility from 16-bit/44.1 kHz to 24-bit/96 kHz WAV, or MP3 from 48 kbps to 320 kbps and enough tools onboard to make impeccable recordings.
  • The H1 records on microSD cards and comes with a 2GB microSD card. Using a 32GB microSDHC card allows over 50 hours of recording time at 16-bit/44.1 kHz.
  • Extremely lightweight only weighing 581g and only being 18.4 x 15 x 13.4 cm.

Kit Includes

  • Zoom H1
  • Windscreen
  • AC adapter (USB type)
  • USB cable
  • Adjustable tripod stand
  • Padded-shell case
  • Mic clip adapter One size.

Quantity : 5

Midi Controllers

81Qn91tAM4L._SL1500_

Akai LPK25

Information

  • Usb midi, works with virtually any music software or daw
  • 8 backlit velocity-sensitive drum pads to send note or program changes
  • 8 q-link knobs for controlling virtually any parameter
  • 4 programmable memory banks
  • Editing software for mac and pc included

Quantity : 1

71ij1mGNIqL._SL1500_

Korg Nanokontrol2

Information

  • Low-profile, multi-function control surface
  • New track select and marker advance parameters
  • Usb powered
  • Free software bundle included via download
  • Compatible with ipad via camera kit

Quantity : 1

31kTJEnKg4L

Korg Nanopad2

Information

  • Excellent for playing or entering drum data
  • Sixteen solid, responsive, and velocity-sensitive trigger pads
  • Usb powered
  • Free software bundle included via download
  • Compatible with ipad via camera kit

Quantity : 1