Transana Software

transama_screen

Transana is software for professional researchers who want to analyze digital video or audio data. Transana lets you analyze and manage your data in very sophisticated ways. Transcribe it, identify analytically interesting clips, assign keywords to clips, arrange and rearrange clips, create complex collections of interrelated clips, explore relationships between applied keywords, and share your analysis with colleagues. The result is a new way to focus on your data, and a new way to manage large collections of video and audio files and clips.

Transana is open-source and available for both PC and Mac. There is a small charge for use.

Further details and download the software here.

Arduino Breakout Boards

09269-01

Triple Axis Accelerometer Breakout – ADXL335

Breakout board for the 3 axis ADXL335 from Analog Devices. This is the latest in a long, proven line of analog sensors – the holy grail of accelerometers.

Information

  • The ADXL335 is a triple axis MEMS accelerometer with extremely low noise and power consumption – only 320uA!
  • The sensor has a full sensing range of +/-3g.
  • There is no on-board regulation, provided power should be between 1.8 and 3.6VDC.
  • Board comes fully assembled and tested with external components installed.
  • The included 0.1uF capacitors set the bandwidth of each axis to 50Hz.

Quantity : 2

10496-01__67483__33463.1368472070.1280.1280

GS407 Breakout Board

This is a breakout board to allow simple access to the tightly pitched pins on the GS406 and GS407 GPS units.

Information

  • This board breaks out all of the necessary pins to a row of standard 0.1″ spaced header to allow for easy bread boarding and simple connection.
  • Note: TXO and RXI are labeled according to the GS407 datasheet, which is from the point of view of the MCU. Therefore, TXO should connect to TX on your microcontroller, and RXI should connect to RX.
  • Note: This is not compatible with the newer GS407 module, as it uses a different connector completely. Please check to make sure this board will work with your module. ktxbai!

Quantity : 2

XBEE_BRAKOUT_001__33349__62354.1368470919.1280.1280

Breakout Board for Xbee Module

This is a simple breakout board for the popular XBee product from Digi.

Information

  • This board breaks out all 20 pins of the XBee to a 0.1″ standard spacing dual row header.
  • The spacing between 0.1″ headers is 0.5″ making it breadboard DIP friendly.
  • We highly recommend using the female sockets to avoid having to solder the XBee permanently to the breakout board.
  • This is the PCB only.

Quantity : 2

Arduino Rangers

srf05a__64898__55173.1368472390.1280.1280

UltraSonic Ranger

This low cost Ultrasonic Ranger allows you to detect the distance of an object between 1cm and 4m.

Information

  • Two operational modes are available
  • Single pin for trig/echo or 2 Pin SRF04 compatible.
  • The input Trigger is a 10uS Min.
  • TTL level pulse
  • Echo Pulse is Positive TTL level signal, with the width proportional to the object range.
  • Range – 1cm to 4m.
  • Power – 5v, 4mA Typ.
  • Frequency – 40KHz.
  • Size – 43mm x 20mm x 17mm height.

Quantity : 2

GP2DY0A21__37971__88451.1368472403.1280.1280

InfraRed Ranger GP2Y0A21

Information

  • The GP2D120 is an easy to use IR range sensor that outputs an analog voltage relative to the distance.
  • This sensor can detect ranges from as close up as 10cm through to 80cm.

Quantity : 2

Kenable USB 2.0 High Speed Cable Printer Lead A to B 1m

61RRuTnJzyL._SL1000_

Information

  • Length : 1m
  • Connections : A plug (flat) to B plug (Square)
  • USB v2.0 is a high speed connection method which is 40 times faster than USB v1.1 (480Mbps as opposed to 12Mbps).
  • It is plug & play and hot swappable (no need to turn off your PC to plug a device in or out).
  • USB v2.0 peripherals will not work at High Speed (480Mbps) unless they are connected with a USB v2.0 cable and connected to a computer equiped with USB v2.0 ports.

Quantity : 6

Arduino Boards

ArduinoUno_R3_Front_450px__56471__20476.1368472596.1280.1280

Arduino Uno – R3

The Arduino Uno is a microcontroller board based on the ATmega328. It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started.

Information

  • Microcontroller – ATmega328
  • Operating Voltage – 5V
  • Input Voltage (recommended) – 7-12V
  • Input Voltage (limits) – 6-20V
  • Digital I/O Pins – 14 (of which 6 provide PWM output)
  • Analog Input Pins – 6
  • DC Current per I/O Pin – 40mA
  • DC Current for 3.3V Pin – 50mA
  • Flash Memory – 32 KB (ATmega328) of which 0.5KB used by bootloader
  • SRAM – 2KB (ATmega328)
  • EEPROM – 1KB (ATmega328)
  • Clock Speed – 16MHz

Quantity : 4

halfboard_LRG__38170__71109.1368472541.1280.1280

Half Size Breadboard

This half sized breadboard (2.2″ x 3.4″) is perfect for small projects and can be “snapped” together for larger ones. If a smaller board is required you can easily pull off the power rails or cut it in half using a saw to create 2 tiny breadboards.

Quantity : 10

12045-04__75102.1413881075.1280.1280

Bread board mini modulare blue

This blue Mini Breadboard is a great way to prototype your small projects.

Information

  • With 170 tie points there’s just enough room to build and test simple circuits.
  • Great for breaking out DIP package ICs to jumper wires!
  • If you run out of room, no worries, these mini breadboards can be snapped together to form larger stretches of board.
  • It has a peel and stick adhesive backing as well as two mounting holes for M2 screws so you can anchor it down.

Quantity : 10

bw6_01__68572__52198.1368472820.1280.1280

Breadboard jumper wire pack

Information

  • Basic breadboard jumper wire pack.
  • Including 4 different lengths: 200mm,165mm,125mm and 80mm.
  • Perfect design for a breadboard.
  • Contains approx 65 pieces

Quantity : 5

Arduino Starter Kit

cbabfd3196ac2a679c9c189fb441b6a1.image.447x354

This kit walks you through the basics of Arduino and electronics in a hands-on way. You will be able to build 15 projects using components that let you control the physical world through different kinds of sensors and actuators.

Click here to find out what projects you can make.

Kit Includes

  • 1 Arduino Projects Book (170 pages);
  • 1 Arduino UNO rev.3;
  • 1 USB cable;
  • 1 Breadboard;
  • 1 Wood base;
  • 1 9V Battery snap;
  • 70 Hard cables;
  • 2 flexible cables;
  • 6 Photoresistors;
  • 3 Trimmer d10 kOhm;
  • 10 Pushbutton;
  • 1 Temperature sensors;
  • 1 Tilt sensor;
  • 1 LCD (16x2i);
  • 1 LED (white);
  • 1 LED (RGB);
  • 8 LED (red);
  • 8 LED (green);
  • 8 LED (yellow);
  • 3 LED (blue);
  • 1 CC motor 6/9V;
  • 1 Servomotor;
  • 1 Piezo;
  • 1 H bridge;
  • 2 photocoupler;
  • 5 BC547;
  • 2 IRF520;
  • 5 100nF capacitor;
  • 3 100uF capacitor;
  • 5 100pF capacitor;
  • 5 1N4007 diode;
  • 3 Transparent jelly (rosso, verde, blu);
  • 1 Male strip connector (40×1);
  • 20 220 Ohm resistor;
  • 5 560 Ohm resistor;
  • 5 1 kOhm resistor;
  • 5 4.7 kOhm resistor;
  • 10 10 kOhm resistor;
  • 5 1 MOhm resistor;
  • 5 10 MOhm resistor.

Quantity : 2

Multimeter

Multimeter_1__50321.1389280567.1280.1280

This measures AC and DC Voltage, Current, Resistance, Gain and even has a built in transistor tester.

Information

DC Voltage

  • Display: Blue Backlight LCD, 1999 counts, updates 2-3/sec
  • Measuring method: Dual-slope integration A/D Converter
  • Operating Environment: 0 to 40 °C
  • Storage Temperature: -10°C to 50°C
  • Power: 9V Battery, NEDA 1604 or 6F22 Type
  • Fuse Protection: 200mA/250V
  • Size: 138mm x 69mm x 31mm
  • Weight: Approx. 280g
  • Measurement Range 200VmV-600V
  • ±0.5% of rdg ± 2 digits
  • Overload Protection: 250V rms

AC Voltage

  • Measurement Range 200V-600V
  • ±1.2% ± 10 digits
  • Overload Protection: 600VDC or rms

DC Current

  • Measurement Range DC 2000-10A
  • ±1% of rdg ± 2 digits
  • Overload Protection: F 200mA/250V fuse (10A range unfused)

Resistance

  • Measurement Range 200 Ohms – 2M Ohms
  • ±0.8% of rdg ± 3 digits
  • Maximum Open Circuit Voltage: 3.2V
  • Overload Protection: 250VDC or rms

Transistor

  • Measurement Range hFE TEST (0-1000)

Quantity : 1